Asphalt Resurfacing & Overlay
A fresh asphalt overlay on top of a surface that's worn but still solid underneath — a smooth new top at a lower cost than full replacement.
If your driveway or lot is faded, raveling, and showing surface cracks but the base underneath is still sound, you often don't need a full tear-out. Resurfacing — also called an overlay — places a fresh layer of hot-mix asphalt over the existing pavement, bonding to it to give you a smooth, dark, water-shedding surface again.
The key word is honesty: an overlay is only the right call when the existing base is stable. If we see deep alligator cracking, heaving, or drainage failures, paving over them just hides the problem for a season. We'll tell you straight whether your surface is a good candidate for an overlay or whether your money is better spent on a full replacement.
What's included
- Inspection of the existing surface and base condition
- Cleaning and prep of the area to be overlaid
- Repair of failed spots and leveling of low areas
- Tack coat so the new layer bonds to the old surface
- Fresh hot-mix asphalt lift placed and compacted
- Re-established edges and smooth transitions
How we approach it
Every asphalt resurfacing & overlay job follows the same fundamentals — assess honestly, prep the base, and finish with attention to drainage and edges. Here's the sequence from first call to final walkthrough:
Start to finish
Free on-site estimate
We visit your property, measure the area, talk through drainage and how you use the space, then send a clear written quote. No pressure and no surprise add-ons later.
Excavate & grade
We remove the old surface or sod, then cut and shape the sub-grade so water sheds away from your home and garage instead of pooling on the pavement.
Base & compaction
A crushed gravel base is brought to depth and compacted in lifts. A solid, well-drained base is what keeps New Hampshire frost from heaving the asphalt later.
Pave & roll
Hot-mix asphalt is laid with a paver and compacted with a roller while it's hot, building a smooth, tightly knit mat at the right depth for the job.
Final walkthrough
We clean up, check the edges and slope with you, and explain how to care for fresh asphalt through its first season so the surface cures hard and even.
Asphalt Resurfacing & Overlay in New Hampshire
Asphalt Resurfacing & Overlay questions
Is resurfacing cheaper than replacing my driveway?
Usually, yes. Because resurfacing reuses your existing pavement as the base, there's less excavation and material involved than a full replacement. It only works when that base is still structurally sound, so we always check before recommending it.
How do I know if I need an overlay or a full replacement?
It comes down to the base. Surface-level wear, fading, and shallow cracks are good candidates for an overlay. Widespread alligator cracking, potholes, sinking, or standing water point to base failure, which an overlay won't fix. We'll assess it honestly during your free estimate.
How long does a resurfaced driveway last?
A quality overlay on a sound base can add many years of service. Sealcoating it once it has cured and keeping water off the edges will help you get the most out of the new surface.
Ready for a driveway that lasts?
Free written estimates across New Hampshire. Tell us about your project and we'll get you a fair, no-pressure quote.